To: | David Cutter <d.cutter@ntlworld.com> |
---|---|
Subject: | Re: Topband: WB6RSE Flag type loop question |
From: | Carl Luetzelschwab <carlluetzelschwab@gmail.com> |
Date: | Thu, 2 Aug 2018 07:28:38 -0400 |
List-post: | <mailto:topband@contesting.com> |
David, The NEC-4.2 engine appears to give very good results with buried and close-to-ground wires (the NEC-4.1 engine compares favorably, too). It is instructive to read N6LF's July/August 2016 QEX article on his modeling efforts with buried and close-to-ground wires. You can get Rudy's article at http://rudys.typepad.com/files/qexjul-aug-2016-bog.pdf. Carl K9LA _________________ Topband Reflector Archives - http://www.contesting.com/_topband |
Previous by Date: | Re: Topband: WB6RSE Flag type loop question, David Cutter via Topband |
---|---|
Next by Date: | Re: Topband: WB6RSE Flag type loop question, David Cutter via Topband |
Previous by Thread: | Re: Topband: WB6RSE Flag type loop question, David Cutter via Topband |
Next by Thread: | Re: Topband: WB6RSE Flag type loop question, David Cutter via Topband |
Indexes: | [Date] [Thread] [Top] [All Lists] |