Hi Paul,
Happy to! That's my problem too, lots of trees too close together.
This is the drone I ordered:
https://www.amazon.com/DROCON-Brushless-minutes-Quadcopter-Distance/dp/B06XTNS8HF/ref=as_li_ss_tl?s=toys-and-games&ie=UTF8&qid=1508031043&sr=1-4&keywords=mjx+bugs+3+BLUE&linkCode=sl1&tag=dglobe_affordable-20&linkId=76e02ecd1fd450e244867238228bfb10
Prices on drones have really come down.
My plan is to tie 3/16" braided nylon cord to the drone; take off
vertically from the S side of the tree about 50' away to at least twice the
tree's height, move straight N at that height, and then descend straight
down *at least* 50' past the tree. (I'm being overcautious.)
That line will then be used to pull a 1/4" or 3/8" nylon rope over the tree
and make a loop (tie the ends together). At those ends is where the metal
pulley will be, attached at that point with about 2 or 3 feet of rope to
keep it from touching the tree. The 14 AWG THHN wire for the inverted-L
will go through that pulley.
*This drone may or may not work. *It doesn't have features like GPS that
more expensive drones have. I won't receive it until after the first week
in December.
73, Mike
www.w0btu.com
On Tue, Nov 27, 2018, 1:12 PM [private] wrote:
> Sir : could you tell me what drone and accessories you 're going to use
> for that pulley - in - the - tree job?
>
> My QTH is almost all trees ... shooting fishing line gets hopelessly
> tangled in a number of trees . Sure would like to "drop" a line from a
> drone.
>
>
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|