Re: Topband: Three Port Rx antenna splitter

[Eric NO3M <no3m@no3m.net>]

Corrected the autotransformer turns/tap on the 2-way splitter examples...

http://no3m.net/wp-content/uploads/2018/12/splitters.png

On 12/24/18 1:57 PM, Eric NO3M wrote:
> Frank
>
> If you really want a 3-port splitter, see here:
>
> http://no3m.net/wp-content/uploads/2018/12/splitter-3.png
>
> Two more common alternatives using 2-port splitters:
>
> http://no3m.net/wp-content/uploads/2018/12/splitters.png
>
> 73 Eric NO3M
>
>
> On 12/24/18 8:00 AM, Frank VO1HP wrote:
> > Does anyone have a schematic for a 75ohm three port splitter using #73
> > binocular cores.   I have those on hand.   Need to feed beverage to two
> > TS590SG’s and Skimmer SDR in CQWW160.
> >
> > 73 Frank VO1HP
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband 
> Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector