Some cable tv splitters will work below 2mhz.
You’ll need to test it to be sure.
Mike va3mw
Sent from my iPad
> On Feb 2, 2019, at 4:42 PM, George Dubovsky <n4ua.va@gmail.com> wrote:
>
> Shameless plug: if anyone needs a new Mini-Circuits ZSC-2-1-75 (different
> package, still BNC connectors), I have a bunch of them for $15 each plus
> shipping. Change one internal chip resistor, and it's a very good 50 Ohm
> splitter/combiner too.
>
> 73,
>
> geo - n4ua
>
>> On Sat, Feb 2, 2019 at 4:35 PM Phil Duff <na4m@suddenlink.net> wrote:
>>
>> Fred KE7X’s K3 book (pg 162) suggests the Mini-Circuits ZFSC-2-1-75 so I
>> picked up a couple used ones on eBay some years ago. These have some
>> isolation between output ports.
>>
>> Have been to be working fine for me.
>>
>> 73 Phil NA4M
>>
>> 73
>>> On Feb 2, 2019, at 2:04 PM, Rudy Bakalov via Topband <
>> topband@contesting.com> wrote:
>>>
>>> I use Mini-Circuits Z99SC-62
>>>
>>> https://www.minicircuits.com/pdfs/Z99SC-62-S+.pdf
>>>
>>> Rudy N2WQ
>>>
>>> Sent using a tiny keyboard. Please excuse brevity, typos, or
>> inappropriate autocorrect.
>>> _________________
>>> Searchable Archives: http://www.contesting.com/_topband - Topband
>> Reflector
>>
>> -. .- ….- --
>> Phil Duff na4m[at]suddenlink[dot]net
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> _________________
>> Searchable Archives: http://www.contesting.com/_topband - Topband
>> Reflector
>>
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|