Watching this thread and agree the push up fiberglass tubes are satisfactory.
But being a scronger And most two way RF based comunacation are a like Dodo
birds
I scored a broken RF wise Motorla Station master. And a set of mounts….FREE
for the asking . 24 ft. long , I had to remove the inside antennas to have
the noneconductive support tube. Was easly mounted on s 4X4 mounted on a
X frame made of 2X4’s
( had to remove in the summer to mow )
Call me frugal
Wayne W3EA
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
________________________________
From: Topband <topband-bounces@contesting.com> on behalf of Wes
<wes_n7ws@triconet.org>
Sent: Wednesday, February 20, 2019 11:53:55 AM
To: topband@contesting.com
Subject: Re: Topband: Satisfactory fiberglass pole for K9AY loop
https://mgs4u.com/fiberglass-push-up-masts/
On 2/20/2019 7:15 AM, N4ZR wrote:
> Maybe 15-20 years ago, I used a very inexpensive push-up fiberglass pole to
> support the loops of a K9AY loop system. Alas. details and source have fled
> my brain, and much of what I've studied on line is much more expensive (and
> probably much sturdier) that what I had then. I'd appreciate any current
> suggestions.
>
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|