If it hasn't already been mentioned, here's something to watch:
https://www.youtube.com/watch?v=fyZR9uMBnIo all about receive antennas.
about an hour in W3LPL gets into more detail about high and low Z circle
arrays. I'm definitely thinking about this on a neighbour's land.
David G3UNA/G6CP
> On 30 July 2019 at 08:34 terry burge <ki7m@comcast.net> wrote:
>
>
> Hi again folks,
>
>
> Got some great advice from several others. 'Shared Apex'; KD9SV
> bi-directional beverage recommended; K9AY (guess I need to get busy and
> finish mine); Hi-Z 8 along with Waller-Flag at 95' head and shoulders above
> others (but expensive and tough to build); both K9AY and Beverages not very
> effected by TX ants/other objects around them so much. No real
> recommendations for DHDL, EWE, Flag/Pennant, etc. Being that my property is
> only one and a half acres for all but the bi-directional KD9SV beverage it
> sounds like my first step is to get the K9AY going and the beverage if I can.
> That does mean some 'interesting' hill climbing exercise and hopefully my
> neighbor won't be target practicing while I'm on his hillside. Don't we hams
> do some strange things just to be able to hear radio signals?
>
>
> Anyway, that's what I got so far. I do wonder which is better between the
> 'shared apex loop(s)' and maybe a 4 or 8 vertical RX array from DXE. Why
> hasn't any hams wrote about what is involved in making a high impedance
> receive vertical work? Of course that requires Doppler shifts I guess like I
> used in the USASA for direction finding way back when (flare 7/9 style). Who
> would have thought I'd be looking at using that technology so many years
> later?
>
>
> Terry
>
> KI7M
>
> > On July 28, 2019 at 9:27 PM terry burge <ki7m@comcast.net> wrote:
> >
> >
> > Hi folks,
> >
> > I have four kits purchased on ebay for receive antennas as well as a
> > bi-directional beverage from KD9SV. Looking on my county plot map it looks
> > like I can run about a 412' beverage using my neighbors ground and mine.
> > Got a good neighbor you could say who just doesn't want a BOG to trip on
> > but a beverage not too low to walk into is Ok. My ebay provided kits are
> > DHDL, EWE and Penant/flag/diamond from a low cost Canada source. But I'm
> > faced with the problem of fences, power lines, roads and my TX antennas on
> > my 1 1/2 acre plot. If one of those antennas could handle being near the
> > fences,etc or TX antennas I'd like to hear about it. I've already got a
> > K9AY in the works and that one is near my 40 meter 4-square. Running the
> > beverage is going to be near or even under my K8UR style 80 meter 4-square
> > made with 1/2 WL slopers. I've thought some about converting the 80 meter
> > 4-square to using 3":irrigation tubing extended with some 3" irrigation
> > tubing and a coil at the elevated base b
ut
> I'm just not sure if it would be an improvement. It would be near 50'
> verticals if I could do it. Not sure if I would lose too much gain.
> >
> >
> > Any suggestions other than 'give up'? I've always had a time hearing
> > the DX especially on 160 meters.
> >
> > Terry
> >
> > KI7M
> >
> >
>
>
>
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|