Topband
[Top] [All Lists]

Re: Topband: Inverted L in contact with leaves

To: N4ZR <n4zr@comcast.net>, topband reflector <Topband@contesting.com>
Subject: Re: Topband: Inverted L in contact with leaves
From: Joe Galicic <galicic@comcast.net>
Reply-to: Joe Galicic <galicic@comcast.net>
Date: Fri, 30 Aug 2019 11:07:58 -0400 (EDT)
List-post: <mailto:topband@contesting.com>
Hi Pete. My inverted L over K2AV FCP was in the trees touching limbs and 
leaves.  Although it worked OK it wasn't until I moved it into the clear that I 
realized how much signal I was loosing having it in the trees.  Nearly 3db 
increase according to RBN after the move.  RBN testing was done immediately 
before and after the move.  Of course this test is just a relative indicator 
but it did show a lot of improvement after the move.  I know Guy K2AV has done 
similar test with similar results.  -Joe N3HEE


> On August 29, 2019 at 11:23 AM N4ZR <n4zr@comcast.net> wrote:
> 
> 
> My inverted L is taking shape - about 60 vertical, the rest horizontal.  
> For a couple of months anyway, it is touching a number of leaves in the 
> vertical section.  I assume that's not a concern, but thought I'd ask 
> before I get a lot of radials down. First short radial is down and 
> MFJ-259 results look promising.  It's just a problem of waiting for lawn 
> mowing to stop hi.
> 
> -- 
> 
> 73, Pete N4ZR
> Check out the Reverse Beacon Network
> at <http://reversebeacon.net>, now
> spotting RTTY activity worldwide.
> For spots, please use your favorite
> "retail" DX cluster.
> 
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
<Prev in Thread] Current Thread [Next in Thread>