I'm in the process of building up a K9AY loop, using the Array Solutions
boxes, and it occurred to me that I probably need to work out some way
to protect the preamp in the shack-end box from transmitted RF,
particularly since the K9AY loop is only about 60 feet from the vertical
leg of my inverted L and I'll be running 1500 watts.
I can see maybe cutting off the DC to the preamp, but figure that won't
be enough. Alternatively, I can probably work out a way to either open
or short the feedline coming into the indoor box where the preamp is.
Any advice as to which would be best (opening or shorting)? I only have
one spare transistor.
Advice much appreciated
--
73, Pete N4ZR
Check out the Reverse Beacon Network
at <http://reversebeacon.net>, now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|