Ned
I was with right up until the last statement. What exactly is "ohmic
isolation" ? I never heard that term before ..could you expand on that
Dave
NR1DX
On 11/23/2019 3:21 PM, Ned Mountain wrote:
- Unified Microsystems has put a lot of effort into improving the
quality and water resistance of the original BevFlex-4 design
-
- The boxes are highly water resistant with rubber gaskets to allow
them to be opened repeatedly without compromising water resistance.
-
- The PCB assemblies are conformal coated to protect against
condensation or other moisture
-
- The use of internal jumpers reduces the number of penetrations of
the box which enhances water resistance
-
- There is lightning protection built into the end termination
units
-
- The BevFlex-4X system has multiple instances of Ohmic isolation
to reduce noise pickup from ground loops
Ned
WC4X
Ned Mountain
ned.mountain@mindspring.com
770 823 4205 (M)
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband
Reflector
--
Dave
Manuals@ArtekManuals.com
www.ArtekManuals.com
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|