I think the question was meant as a joke, as it is called "galvanic
isolation".
(It is either Ohmic or isolation.)
73,
George,
AA7JV
On Sat, 23 Nov 2019 20:09:49 -0500
"Ned Mountain" <ned.mountain@mindspring.com> wrote:
Dave,
Response from the designer W8GNM to your ohmic resistance question relative
to the BevFlex-4X:
Ohmic isolation means there is no direct, DC, connection between the shields
on the feedline coaxial cables and the antenna. The signals are coupled
through isolation transformers.
In addition, the feedline coaxial cables are isolated from the coaxial cable
to the receiver by an RF transformer.
Ned
WC4X
Ned Mountain
ned.mountain@mindspring.com
770 823 4205 (M)
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|