On 1/29/2020 4:19 PM, donovanf@starpower.net wrote:
We use the K9AY Model RAS-8x2 Receive Antenna Switching System
So do I. I had him build me an 8x4 version. Six RX antennas feed the
matrix, plus the output of an NCC-1. Two of the outputs feed the NCC-1,
the out of the NCC-1 feeds input #7, RX out of my primary K3 feeds input
#8.
The other two outputs feed RX In and Sub RX in of both K3s. This setup
provides lots of flexibility -- I can phase anything with anything.
During 6M season, a GAs-FET preamp gets patched between RX out and the
matrix. It's slightly better than what's in the K3.
73, Jim K9YC
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|