I am making some receive antennas and the coax will be for the choke
that goes through a torriod. The cores I have would not take rg6. This
is from the YCCC receive antenna array.
W0MU
On 2/13/2020 5:55 PM, Andreas Junge wrote:
Mike,
What’s wrong with RG6? Or the DX Engineering version of it:
https://www.dxengineering.com/search/department/cable-and-connectors/product-line/dx-engineering-f6-75-ohm-bulk-coaxial-cable?autoview=SKU&keyword=rg6&sortby=BestKeywordMatch&sortorder=Ascending
$0.30/foot
Plenty good for RX antenna use.
73, Andreas, N6NU
On Feb 13, 2020, at 3:31 PM, W0MU Mike Fatchett <w0mu@w0mu.com
<mailto:w0mu@w0mu.com>> wrote:
I am looking for a good source for RG-179 coax to build some RX
antennas. I tried an Ebay seller and got rg58!!####
W0MU
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband
Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|