Steve, Thank you for putting together these videos. Very informative and I
always learn something from each one. 73 Fred KB4QZH
-------- Original message --------From: VE6WZ_Steve <ve6wz@shaw.ca> Date:
6/3/20 7:34 PM (GMT-05:00) To: topband <topband@contesting.com> Subject:
Topband: Beverage field switching I have received a number of email questions
asking how I switch my Beverage wires in the field.Here is a video that shows
the design of my cascaded 2 relay high isolation 4 relay switch box, as well as
my latest design that uses 1:1 binocular core "braid breaker” transformers to
replace my large type 31 toroids on the RG-6 lines. This is much more
economical and easier to set up in the field.I show how my switch boxes are
deployed in the field and share some ideas about laying out the RG-6 feed lines
on the forest floor.Video link here: https://youtu.be/Ei7q1Hy6FDk
<https://youtu.be/Ei7q1Hy6FDk>73, de steve ve6wz_________________Searchable
Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|