Re: Topband: Need Ideas For "Fusing" Beverages From Falling Trees

[CUTTER DAVID via Topband <topband@contesting.com>]

Mark
I like that idea the best.  I would tie the parts together with a long piece of 
rot-proof cord so they don't get lost. 

David G3UNA/G6CP

> On 03 January 2021 at 16:38 Mark Robinson <markrob@mindspring.com> wrote:
> 
> 
> I use 1/4 inch AMP spade connectors , male and female as a breakaway 
> point on my open wire feeder. I greased them up with dielectric grease 
> to keep the water out.   Automotive bullet connectors might be a tighter fit
> 
> 73 Mark N1UK
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector