I called cq for about half an hour around 0000z last night on 1839 + 930 to
keep clear of FT8. 500w to inefficient ant. No takers and no reports from
PSKReporter. Plenty of FT8 about though.
may try again tonight.
Brian
G3VGZ
Jim Brown <jim@audiosystemsgroup.com> wrote:
> On 2/2/2021 8:34 PM, Mark Lunday wrote:
> > What dial frequency, please? My WSJT-X 2.3.0 doesn't have any
> > frequencies for 160..
>
> You get them if you go to the frequency list and do a reset. It's in the
> Quick Start Guide for FST4 and FST4W. On 160, dial frequency is 1839. I'm
> there now, was calling CQ for a while with 5W. The guide suggests 1500 Hz
> offset, but that puts you in the FT8 watering hole. I'm using 1050 Hz
> offset, because I have some kind of an intermod on 1840. I'm set for
> FST4-60. PSKReporter either doesn't know about FST4 or no one is there to
> hear me.
>
> I can lay on some more power if you like. Email in the shack is
> k9yc01@gmail.com
>
> 73, Jim K9YC
>
>
> _________________ Searchable Archives: http://www.contesting.com/_topband
> - Topband Reflector
>
>
--
Brian D
G3VGZ
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|