Thanks for the info George.
I have watched your video….very FB indeed.
Using the 74HC244 line driver/buffer as a PA is a great idea. I had heard of
this idea before, but never found a circuit.
Jim, WA9VEZ put me on to this design which gives good detail and output
matching ideas.
https://circuitsalad.com/2015/07/23/1-watt-qrp-rf-amp-using-74ac240-or-74ac04-inverter/
<https://circuitsalad.com/2015/07/23/1-watt-qrp-rf-amp-using-74ac240-or-74ac04-inverter/>
It’s great to get detail from someone who has already built up the circuit and
done the experimenting.
This will be a fun project for the next few weeks.
This fellow, Ray Ring has an amazing blog with a gold mine of circuit ideas and
design. He is bookmarked on my computer now!
https://circuitsalad.com/ <https://circuitsalad.com/>
73, de steve ve6wz
> On May 3, 2021, at 7:17 AM, GEORGE WALLNER <aa7jv@atlanticbb.net> wrote:
>
> Hello Steve,
>
> I have built exactly what you are looking for: a small 200 mW transmitter
> that can be attached to a drone (including battery).
>
> For the "PA" stage a I used a 74HC244 buffer, with all the gates paralleled,
> feeding a resonant tank wound on a ferrite rod, which is also the antenna.
> The battery is a single 3.7 V 500 mAhr LiPO. My -30 dBi two element loaded
> loop array can "hear" it from about half a mile, far enough to do RX antenna
> pattern measurements.
>
> See : https://www.youtube.com/watch?v=JMujut_5FdY
> <https://www.youtube.com/watch?v=JMujut_5FdY>
>
> GL and 73,
>
> George
>
> AA7JV/C6AGU
>
>
>
>
>
> On Sun, 2 May 2021 18:46:49 -0600
>
> VE6WZ_Steve <ve6wz@shaw.ca> wrote:
>
> For field testing, I’m looking for some ideas for a very small RF amplifier
> to boost the output from a HCMOS 1.843 MHz oscillator.
>
> These oscillators will give me about 20 mW max, but I need a bit more since I
> plan to mount it on my small drone and will need a bit more range.
>
> My drone can lift up 130 grams, so I’d like it to run on a 5v supply. (maybe
> a 9v battery with regulator or 3 AAA cells)
>
>
> I considered something like a Mini Circuits PHA-13ln 21 dB monolithic amp,
> but not sure thats such a good idea.
>
> A 2N5109 base amp is a current pig and too heavy.
>
>
> Any ideas?
>
>
> 73, de steve ve6wz
>
>
>
> _________________
>
> Searchable Archives: http://www.contesting.com/_topband
> <http://www.contesting.com/_topband> - Topband Reflector
>
>
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|