On 9/25/2021 7:19 PM, Pete Smith N4ZR wrote:
Re the Flexweave, I didn't recognize the name so I googled it, and who
knew...? It sounds like it might work very well for the whole inverted
L, and these days it's not appreciably more expensive than #14 THHN.
I don't recommend it. I bought several varieties of it when I got back
on the air in 2003 and rigged several wires using it. So did neighbor
K9IKZ. Within a year, all were on the ground.
I'm a big fan of solid copper, #14 to #9, depending mainly on the
stress. Those of my antennas having the greatest mechanical stress are
#8 bare copper, stretched (between trailer hitch and trunk of big
redwood) until it breaks, making it approximate #9 hard drawn. FD wires
are #14.
And soldered connections are a big no-no. W6GJB and I use multiple split
bolts.
73, Jim K9YC
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|