Date: Mon, 17 Jan 2022 20:18:52 +0000 (UTC)
From: Mike Furrey <mikefurrey@att.net>
To: 'Kenny Silverman' <kenny.k2kw@gmail.com>, 'TopBand List'
<topband@contesting.com>
Subject: Re: Topband: 1:2 UNUN
< Perhaps a "hair pin" match? I used a hair pin coil at the base of a
vertical that was 35 ohms.
<73, Mike WA5POK
## a simple helical hairpin is the real answer. Just compress / expand
the coil for
1:1 swr. The coil will also DC ground the vertical. Dead simple.
## Tim's L network will also work, but the series L, and shunt C won't
provide for DC grounding the vertical.
Jim VE7RF
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|