I can testify that F connectors with RG-6 will handle the legal limit on at
least 160 and 80 without even getting warm.
This is true here with 2500 watts into a dummy load and CW contesting.
I waterproof mine by partially filling them with silicone dielectric
grease. Been doing that here for many years without a single problem.
Outdoors, I use waterproof F connectors.
If you use RG-6, the rough points on the center conductor should be filed
smooth with a small fine file. Otherwise, the contacts in the male
receptacle can be damaged.
And RG-6 has a power handling curve very similar to RG-213.
73 Mike
W0BTU
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|