Re: Topband: Series LC to notch AM broadcast ?

[<n4is@comcast.net>]

>>HP  filters offer little rejection towards the top end of the AM broadcast
band..... like  1200-1710 khz. <<

I built several HP filters with >40 db attenuation on 1.7 KHz based on QST,
I don't remember the year 90's about it.

But  some good information here >

https://www.qsl.net/wb5wpa/Filter/DesignAMBrickWall_08.pdf

You can but a 200W HP at DXE, this filter is the best you can get and very
well calibrated/built.

https://www.dxengineering.com/parts/dlw-fl1718

73'
N4IS
JoseCarlos



_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector