Hi.
I am strongly against your recommendations.
1836 kHz is the center of QRP activity!
Use only IARU approved frequencies for digimodes!
iaru-r1.org/wp-content/uploads/2019/08/hf_r1_bandplan.pdf
Karel OK1CF
CRC HF Manager
-----Původní zpráva-----
Od: Topband za uživatele Jim Brown
Odesláno: pondělí 21. února 2022 22:35
Komu: topband@contesting.com
Předmět: Re: Topband: PSK31 etc
> What are recommended frequencies for PSK31 and FT8 (and others if
> applicable) on 160m?
I don't know of digital activity on 160M other than WSJT modes. It's mostly
FT8 and WSPR, very occasionally FST4 and FT4. Default frequencies are in
WSJT-X. Study the manual to activate them.
73, Jim K9YC
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|