Steve,
My frist thought is to clean the contacts ( there open frame relays)
For changing the relays Direct replacement difficult . The Co that makes
them produces them in limited runs for Amerirtron
GL
Wayne ,W3EA
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
From: Steve London<mailto:n2icarrl@gmail.com>
Sent: Tuesday, February 22, 2022 1:05 PM
To: Topband<mailto:topband@contesting.com>
Subject: Topband: Relay bounce
I am using an Ameritron RCS-4 antenna switch to select between beverage
antennas. Recently, it has developed a bad case of relay bounce causing an
S9 spike every time I switch between antennas. Any suggestions on how to
improve this ? Since it's only used for RX antenna selection, I'm amenable
to replacing the relays with something else, although I have had issues
before with other relays due to no current going through the contacts.
Thanks and 73,
Steve, N2IC
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|