We used to fly those as a beacon on our high altitude balloons.
used 28.322 one. on ten meters and full sized dipole with no matching
or anything.
when at 100,000 feet it was heard over 400 miles away!
Joe WB9SBD / W9ET
On 11/8/2022 2:41 PM, fmoeves wrote:
Steve, Awesome video and cool project. I'll be building a few of these. Thank
you Fred KB4QZH
-------- Original message --------From: steve_VE6WZ<ve6wz@shaw.ca> Date:
11/8/22 12:01 PM (GMT-05:00) To:topband@contesting.com Subject: Topband: Signal
source flown under my drone Here is a short video showing some of the small signal
sources I have built and how I can fly them under my drone for testing my RX antennas
on 160m.Using these simple clock oscillators as a 160m signal source is not new, but
I show a couple of small units I built up using the old legacy DIP cans as well as a
SMD that can be flown under my small Mavic Mini drone.I include some PCB Gerber files
and a BOM.https://youtu.be/EGAIrhGG51Y73, de steve ve6wzSent from Mail for
Windows_________________Searchable Archives:http://www.contesting.com/_topband -
Topband Reflector
_________________
Searchable Archives:http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|