I worked AA7JV/MM in the 160 contest. N1MM balked at entering 2 in the section
field but a flag said to place an "R" in front of the number and N1MM logged
the QSO.
I tried submitting my 160 log to ARRL and got an error "copied exchange
(itureg) is missing". What should the proper exchange format so the ARRL robot
will accept my log?
LeeN8LJ
On Sunday, December 8, 2024 at 12:36:19 PM EST, jon jones
<n0jk@hotmail.com> wrote:
George — you were very loud on my rain gutter antenna and thank you for the
contact. You hear well!
Despite a minimal antenna with high local noise and around 50 watts, I worked
the following patient DX in the contest:
DX: ZF9CW, KP4AA, PJ2T, AA7JV/MM & VP5M.
Got on to hand out a few Qs to contestants while watching 6 for UT1FG/MM. No 80
or 160M antenna. Stations went in the log, I set a goal of 50. Then 100....
Forgot how fun and challenging 160M can be. Plan a better set up next year.
*
Jon N0JK KS
________________________________
Date: Sat, 07 Dec 2024 18:57:09 -0500
From: "GEORGE WALLNER" <aa7jv@atlanticbb.net>
To: "W3HKK" <W3HKK@roadrunner.com>, "'topband@contesting.com'"
<topband@contesting.com>
Subject: Re: Topband: Topband Contest- at sunrise
Message-ID: <ximss-51174011@be7.cluster1.echolabs.net>
Content-Type: text/plain; charset="utf-8"; format="flowed"
I thought propagation was very good.
MM in the Pacific from about 1400 miles west of Panama (in DJ76), I could
hear EU, including R3 stations quite well.
No man-made noise here, except my own.
CU and 73,
George
AA7JV/MM -- Region 2
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|