> From: randy@mail.ameritel.net
To: <towertalk@contesting.com>
> Date: Wed, 21 Aug 1996 16:57:26 -0400
> To: towertalk@contesting.com
> Subject: guy wire grounding
> What's the easiest (cheapest, most effective) means of connecting
> copper grounding wire to multiple guy wires at or near the equalizer
> plate?
>
Just use standard cable clamps and left over guy cable to run down to
within 1 foot of the ground and then use a copper cable clamp to
clamp the galvanized guy wire to the copper ground line using an
anti- oxidizing compound like No-Ox or Pent-ox from an electrical
supply house.
de n0yvy steve
|