Towertalk
[Top] [All Lists]

Non-Rohn Tower

To: <towertalk@contesting.com>
Subject: Non-Rohn Tower
From: blckhole@ripco.com (Keith Morehouse - WB9TIY)
Date: Fri, 04 Oct 1996 13:19:46 -0500
shamby wrote:
> 
> Now I find out that 45G is approx 18" per sideand needless to say the
> bracket does not fit.  I am told that Rohn manufactured some tower for
> Motorola, to their specs and it certainly looks like Rohn product, but i
> larger that 25G and smaller than 45G.

There was a Rohn series manufactured to a Motorola spec back in the 70's and
80's that people around Chicago used to refer to as "Rohn 35".  Yes, I seem to
remember that it was around 15" wide.

What the availability is and what the accuracy of my info is, I don't know.

---------------------------###-----------------------------
PROBE ELECTRONICS 100 Higgins Road, Park Ridge IL 60068 USA
Keith J. Morehouse / WB9TIY / Society of Midwest Contesters
847-696-2828  FAX: 847-698-2045  e-mail: blckhole@ripco.com
---------------------------###-----------------------------


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P

<Prev in Thread] Current Thread [Next in Thread>