I read with interest, KM9Ps note on his use of stubs. - Gotta question
for you guys. Bill uses the stubs on the interferring line, ie:
stubs on the 20 meter line to eliminate interferance to the other
stations. Doesn't make sense to me. If you have a 40 meter station
getting into the 20 meter position, reasoning would be to put a
notch for 7 mHz on the 14 mHz station.
Since we assume the 40 meter station is "clean" - then the problem
is overload/i'mod etc in the 20 meter station. Minimizing the amount
of rf from the offending station would be the logical choice.
What am I missing?
de KL7HF
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P
|