Scott Neader wrote:
>
> >> If I should ever lose a top guy wire or its anchor, should I expect
> >>to have the tower collapse instead of bending?
>
> > Interesting question. According to the information that I've seen, a
> >guyed tower will fall typically within a circle around its base approximately
> >30% of its height. It doesn't "fall over" because it is constrained, or
> >tethered, by the remaining guy wires. Talk about a pile of scrap...
> >
> > BTW, this probably shoots the heck out of tower building set-back
> >regulations.
>
> So, what happens to a self-supporting tower when it decides to fall? Does
> it typically stay within that 30% of height... or will my future tower hit
> my neighbor's house? (just planning my answers when the neighbors start
> asking once I do choose a tower and put it up)
>
> - Scott KA9FOX
>
> -------------------------------------------------------------------
> INTERNET SOLUTIONS - Affordable web page design and storage
> Scott Neader (608)788-1234 / FAX (608)787-0100 / neader@QTH.com
> Internet Solutions web: http://QTH.com/is Ham web: http://QTH.com
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: K7LXC@contesting.com
> Sponsored by Akorn Access, Inc & KM9P
Free Standing towers typically fall down wind as straight as a string.
Which is one of the main reasons I like guyed towers and keeping them
50% of tower height plus the mast height away from the house. I do not
want my towers in my living room or bed room.
Unless, of course, it is Rohn 25. That stuff is so light and flimsy, I
have seen it fall on a chain link fence and not hurt the fence, but it
did demolish the tower.
de n0yvy steve
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P
|