Scotch 33 vs Scotch 88

[kballow1@tue.e-mail.com (kballow1@tue.e-mail.com)]

      ************** From: Keith B. Ballow ******************                   
      *** ID L3RA ** Printer Z126 N1 ** Ph. 903-836-6478  ***                   
      *******************************************************                   
SUBJECT: Scotch 33 vs Scotch 88                                                 


We have and use both 88 and 33 here at the Electric Utility where I work.  I    
prefer 33 because it is thinner and easier to work with.  As Stuart stated the  
only difference is the thickness of the tape.  Need more thickness add a few    
more wraps of 33.  I suppose that a 1/4" thickness of 33 would have more glue   
and holding power than a 1/4" thickness of 88...  Also less inclined to         
flagging due to temperature fluctuations.  The glue will hold a thin piece of   
33 down better than a thick piece of 88.                                        

73...                                                                           

Keith Ballow                                                                    
KB5NXW                                                                          

Keith B. Ballow                                                                 
Sr. I&C Technician Martin Lake Plant                                            
Internet: KBallow1@tue.e-mail.com                                               
Compuserve: 75716.1622@Compuserve.com                                           

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P