User mail received addressed to the following unknown addresses:
GRAZ/P1/STEHLIK
------------------------------------------------------------------------------
Return-Path: <owner-towertalk@paris.akorn.net>
Return-Path: owner-towertalk@paris.akorn.net
X-Authentication-Warning: paris.akorn.net: majordom set sender to
owner-towertalk using -f
From: gpalfe@pclink.com
Message-Id: <v01540b00aea59a169b29@[206.11.0.47]>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
To: <towertalk@contesting.com>
Date: Tue, 5 Nov 1996 19:31:52 -0600
To: towertalk@contesting.com
Subject: Grounding tower legs
Sender: owner-towertalk@akorn.net
Precedence: bulk
I just finished erecting a Rohn SSV tower. Rohn supplied the tower with 2
large ground rods and some bare solid copper wire, number 10 size. I know
this is not the recommended wire size to properly ground the tower.
Does anyone know the recommended wire type and size to ground the 3 legs?
Thanks, Greg, wa0bnx
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P
|