I am not too versed on radials for verticals. In installing my HF6V on
the roof(chimney mount) some of the radials will not be laid flat on the
roof but rather elevated because the roof peak is higher than the chimney
mount of the antenna. The specs say you can have the radials lower than
the antenna (45-90 degrees) but what happens if they are higher ? Any
help would be appreciated.
Reply privately and I will pose a summary if anyone is interested.
Casey K9EY
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P
|