I made the 105ca mod to my new 105ba, using the measurments on Hy-gain's
web page. With the 105BA settings the ant had a 1:1 swr at 27800 and the
2:1 point was 28,800. The ant is mounted in the same place 10' off the gnd,
and with the new settings I get 1:5-1 swr at 28450, with a very very sharp
rise in either direction. One would think the freq would be lower at this
height. Anyone else measure their ant at low height, or just set it to
Hy-gain's specs and hope it works??
Mick...W4YV
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P
|