K7LXC@aol.com wrote:
>
> In a message dated 96-12-19 18:17:22 EST, you write:
>
> >I am also trying to study the tower literature for an installation
> >next year. I have had a comment that at least one manufacturer
> >(is it Tri-ex?) states that their crank-up sections are specially
> >strengthened in the area of the overlap.
> >In this case the tower is weakened if the owner lowers it half-way
> >down, under storm conditions?
> >
> The forces on a crankup are obviously at their maximum when the tower
> is fully extended. Having the overlap areas beefed up is a good thing to do
> since most hams load their towers to the max and leave them extended. When
> the tower is lowered, the overall forces are reduced because there is less
> surface area exposed and there is less moment of force on it. If you have a
> tower with a load that exceeds the wind speed rating, you can lower the
> tower an amount (that you have to determine) until you reach a height that is
> safe for that wind load and speed.
>
> 73, Steve K7LXC
>
> TOWER TECH -- professional tower supplies and services for amateurs
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: K7LXC@contesting.com
> Sponsored by Akorn Access, Inc & KM9P
I hear people putting guy wires on self-support or crank-ups,
thinking they are improving wind load etc...
Is this not a -bad thing-?
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P
|