FROM: SAM EFFINGER K9SD
SUBJECT: wanted prop-pitch parts
I am in need of what is called the "low speed bell gear" for a small
prop-pitch motor.
The one I have has been modified for high speed which means the
lower gear on the bell gear has been cut away...
Buying a prop-pitch can be an adventure...you never know what you are
getting until you open it up and then it's too late.
NOTE: some folks have asked me questions on Prop-pitch motors and
I am no expert. This is the second one I have ever seen therefore
I probably have more questions than answers.
Thanks for reading this and if you have an old motor or parts you are
willing to part with please call me or e-mail a note.
phone no. w= 1-618-255-2293 h= 1-618-466-5720
All this work just to say "599 04"Wow! something is wrong with all of us.
k9sd%shellus.com
K9SD
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Sponsored by: Akorn Access, Inc. & N4VJ / K4AAA
|