Hi Glen; I have access to High Quality antenna switches thru my
business so I have one switch dedicated to all the incoming antennas
(including 3-remote switch boxes) and from there i feed a series of
other manual switches to control the various rigs. I take care not to
"load" one transmitter into the front end of another! I have numerous
operating positions and a rather large collection of stuff,so this helps
me to keep it all straight. I of course care fully label everything
with one of those new label makers from Office Depot and I Think before
I key the rig.
Hope this helps drop me a line and I'll share my layout with you.
Regards............ Jack http://www.eswitch.com
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Sponsored by: Akorn Access, Inc. & N4VJ / K4AAA
|