Hello -- Have recently started having a problem with my antennas being
out of sync with the direction my control box is indicating. After two
trips up the tower to reorient, I drilled a hole thru the mast and
installed a bolt so I could be sure that the mast was not slipping in
the mast clamps. After occasional use tonight, the "pointing error" has
increased from about 90 deg. to about 270 deg. Anyone have any ideas as
to what may be causing the loss of sync? Thanks Rick
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|