[TowerTalk] Verticals of Rohn 25

Towertalk

[TowerTalk] Verticals of Rohn 25

To:	<towertalk@contesting.com>
Subject:	[TowerTalk] Verticals of Rohn 25
From:	w4an@contesting.com (Bill Fisher - W4AN)
Date:	Mon, 21 Apr 1997 09:14:24 -0400 (EDT)

I'm starting on the conversion of my 80M 4-square to Rohn-25 (I'm tired 
of fixing broken wire verticals and ropes everywhere).

Question:

  The connection between tower sections... What are ya'll doing there?  

  My idea is to use grease (as usual).  Are you also using some kind of
  strap at the junctions ?   Is it needed?


73

Bill, W4AN


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[TowerTalk] Verticals of Rohn 25, Bill Fisher - W4AN <= [TowerTalk] Verticals of Rohn 25, Barry Kutner [TowerTalk] Verticals of Rohn 25, JOE CLEMENT [TowerTalk] Verticals of Rohn 25, K7LXC@aol.com [TowerTalk] Verticals of Rohn 25, Bill Tippett [TowerTalk] Verticals of Rohn 25, Chuck Dietz (KE5FI) [TowerTalk] Verticals of Rohn 25, Pete Smith [TowerTalk] Verticals of Rohn 25, Tom Wagner [TowerTalk] Verticals of Rohn 25, Chuck Dietz [TowerTalk] Verticals of Rohn 25, K7LXC@aol.com [TowerTalk] Verticals of Rohn 25, Chuck Dietz

Previous by Date:	[TowerTalk] Wire, MarchandJohn
Next by Date:	[TowerTalk] Need Rotator Recommendation., Gene Smith
Previous by Thread:	[TowerTalk] Driven array, Rick Dougherty NQ4I
Next by Thread:	[TowerTalk] Verticals of Rohn 25, Barry Kutner
Indexes:	[Date] [Thread] [Top] [All Lists]