if they deterioate the plastic parts so fast am i not having probs???
tx de w7gg
----------
> From: Roger A. Cox WB0DGF <hygain@compuserve.com>
> To: Bob Wruble <ai7b@teleport.com>
> Cc: towertalk <towertalk@contesting.com>
> Subject: Re: [TowerTalk] KT34XA cracked insulators
To: <towertalk@contesting.com>
> Date: Tuesday, May 06, 1997 6:26 AM
>
> Polycarbonate resins, such as GE LEXAN and others, are extremely
> susceptable to solvents such as WD-40. The GE book lists these chemicals
> to avoid:
>
> Amines, Aromatic Hydrocarbons, strong alkaline detergents, Esters,
> Halogenated Hydrocarbons, Ketones.
>
> Also avoid the following combination: High stress, Hot water, High
> temperature (140-160 deg F).
>
> It is really amazing to see the effects of these chemicals on a sample
> part. Extreme crazing and cracking in a matter of seconds!
>
> Roger WB0DGF
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|