Loctite(r) products work very well too. Used to use their products on
1960's-era British motorcycles to keep all the screws and access covers from
vibrating loose. Those who owned BSA (especially), Triumphs and
Nortons can probably testify to that!
73, Bob AA0CY <aa0cy@contesting.com>
----------
From: Charles H. Harpole[SMTP:harpole@pegasus.cc.ucf.edu]
Sent: Wednesday, May 21, 1997 2:23 AM
To: Jon Zaimes
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] 204BA loose clamps
So Jon, you want everything to last forever?
I use a drop of sillycone sealer on the nuts and bolt heads of all ants
assembled here. Seems to damp down the vibration run-back of bolts and
even hose clamps. Others have same luck? de K4VUD
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|