I can't think of any reason why you couldn't do it.
>
>73, Steve K7LXC
I can see a really bad problem ... the load is probably way way out of
balance, with long booms and multiple antennas, resulting in the heavy
(long axis) wanting to point down..... attempting to rotate this off
balance load could be hazardous to the heath of rotor components. What you
need is a chain saw.
73s de Ed
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|