Frank,
I have a large prop pitch with a home brew control panel that is 19" rack
mount.
Price is $500.00 firm plus PACKAGING and SHIPPING.
The prop pitch itself weighs about 90 lbs.
Prop pitch currently is on an aluminum frame set up for Rohn 45 and
setup needs some work. Was used FB for several years.
Price is as is-no guarantees.
Will probably approximate $600.00 delivered to you.
If interested get questions ready and give me a late evening phone
call at 502-239-2043.
73 Paul D. Schrader N4XM
At 08:53 6/3/97 -0700, you wrote:
>After reading a summary of tower talk on the web page of Scott KA9FOX, I
>asked Trylon and Harold MacFarlane for information. That summary was very
>helpful!
>
>My next problem is to find a rotator -- does anyone have a source? My
>antenna is a 250 pound quad with 26 sq. ft. of load. From what I've read so
>far, the rotator will cost me more than the tower if I don't find a prop
>pitch motor or an used heavy duty ham rotator.
>
>Any help would be greatly apprciated.
>
>Best Regards & 73s
>Frank Bradddddddd
>
>
>--
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Submissions: towertalk@contesting.com
>Administrative requests: towertalk-REQUEST@contesting.com
>Problems: owner-towertalk@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|