Pete,
Drive a drift punch or other large taper between the ends and it will spread
it nicely.
Good Luck,
Bill - N5CMI
Message-Id: <199706061606.MAA00617@dayton.akorn.net>
To: towertalk@contesting.com
Subject: [TowerTalk] thimble gap too narrow
To: <towertalk@contesting.com>
Date: Fri, 06 Jun 1997 12:03:40 -0400
From: Pete Soper <psoper@donedeal.encore.com>
Sender: owner-towertalk@contesting.com
Hi Folks,
The thimbles I got from Texas Towers and Hill Radio come down to a narrow gap,
too small for the thimble to slip over a turnbuckle or shackle. I need a
practical idea for increasing the gap from around 3/16" to 7/16". The 3/8"
thimbles are made of thick metal and are extremely stiff.
Regards,
Pete
KS4XG
(Hill Radio came through with my special order of Rohn parts. I'm very
satisfied with their prices and service.)
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|