Towertalk
[Top] [All Lists]

[TowerTalk] How do I separate seized antenna tubing?

To: <towertalk@contesting.com>
Subject: [TowerTalk] How do I separate seized antenna tubing?
From: Bill.Simpson@MCI.Com (Bill Simpson)
Date: Mon, 30 Jun 1997 11:19 -0500 (CDT)
Hi, Richard

Try lightly heating with a propane torch. Should get them apart quite easily
with the heat.

Bill - N5CMI


Message-ID: <33B7BDB3.6216@shentel.net>
To: <towertalk@contesting.com>
Date: Mon, 30 Jun 1997 10:07:47 -0400
From: "Richard L. Wilkins" <rwilkins@shentel.net>
Reply-To: rwilkins@shentel.net
To: towertalk@contesting.com
Subject: [TowerTalk] How do I separate seized antenna tubing?
Sender: owner-towertalk@contesting.com

I am trying to disassemble an old Mosley Pro-67A so that I can upgrade
it to a 67B.  Several pieces of the antenna tubing will not separate on
the 67A.  The problem seems to be an excessive amount of old dried
Penetrox which has formed a hard glue-like substance.

Does anyone have any suggestions for separating  the tubing?

Thanks,

Richard
KR4V

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:           http://www.contesting.com/km9p/search.htm

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>