Towertalk
[Top] [All Lists]

[TowerTalk] Ham-4 rotor Capacity (fwd)

To: <towertalk@contesting.com>
Subject: [TowerTalk] Ham-4 rotor Capacity (fwd)
From: dave@egh.com (David Clemons)
Date: Tue, 1 Jul 1997 19:21:50 -0400 (EDT)
Hi Pat,

        About 16 years ago I bought a HAM IV.  I was told that I was the 
third owner, but have no idea how old it was at the time.  I mounted it 
inside my Rohn 25, using a thrust bearing.  On top of the tower I have a
HyGain 155BA and HyGain 105BA (just converted to a CA), with 6 feet space
between them.  (Actually, the 15 meter yagi is on top.)  I believe that the
sq. ft wind load for the two of them is just under 10 feet.  I have had
absolutely no problems with this little gem of a rotator.  Hope this 
gives you something to go by.

73, Dave Clemons K1VUT


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>