K7LXC@aol.com wrote:
>
> In a message dated 97-07-15 18:29:11 EDT, k1my@nlis.net (Bruce Makas) writes:
>
> > I intend to partially bury the bottom section of my Rohn 45 tower in
> concrete
> > as per spec. Is there any advantage to using the short SB45G vs using a
> > regular 10 foot section?
>
> The SB short base is a little cheaper on a per foot basis. It doesn't
> have the leg flanges on it so it's a little cheaper to manufacture. Other
> than that, the materials are identical.
Here in Houston when I last priced them, the 5' base sections were
slightly higher per foot than the standard 10' section. On that basis I
have told people that it is cheaper to bury 1/2 a section of tower as
the base.
I had not considered the lack of flanges on the 5' base section as
making it cheaper to manufacture. I guess my local supplier added for
the slow moving item.
Chuck, KE5FI
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|