I mentioned this switch in a previous post the other day but did not give
its part#. It works on 12v dc. It uses 4 wires and is designed to work
with the output from the FL7000 Yaesu linear. With no voltage applied it
automatically selects ant1. Then with the other 3 wires energized one at
a time it selects ant2 through ant4.
73 Steve W8GAZ
----------
From: Monte Stark
Sent: Wednesday, July 30, 1997 8:35 PM
To: steve; 'towertalk@contesting.com'
Subject: [TowerTalk] Yaesu FAS-1-4R Antenna switc
Original Subject:
[TowerTalk] Yaesu FAS-1-4R Antenna switch
Hi All,
I found a Yaesu FAS-1-4R remote antenna switch.
All that is in the box is the switch unit that mounts on
the tower. There is no control box.
Is that normal or should there be a control box with it?
There is also no paperwork.
There is 1 ground lead and 3 leads for the relays. But there
are 4 relays. Anybody know how it switches?
Thanks, cul,
73, Ron, SOWP 5545M,
.........KU7Y.....ARCI #8829.....Monte "Ron" Stark.....
....ku7y@sage.dri.edu...........Washoe Lake, Nevada....
....QRP-L #17...ARS #49...NorCal #330.....NRA LIFE.....
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|