Towertalk
[Top] [All Lists]

[TowerTalk] Re: coax as balanced line...CORRECTION

To: <towertalk@contesting.com>
Subject: [TowerTalk] Re: coax as balanced line...CORRECTION
From: rrossi@btv.ibm.com (Ronald D Rossi)
Date: Tue, 05 Aug 1997 14:40:29 -0400
...
>In an unbalanced line all the signal is presented on the center conductor 
>referenced to the shield. On a balanced feed 1/2 the signal is presented on 
>one conductor and 1/2 on the other conductor 180deg out of phase. 0.5V**2*R + 
>0.5V**2*R = V**2*R. The R would be constant between the two cases.

DUH, do you think I put the wrong operator in the equation!! It of course 
should read:

one conductor and 1/2 on the other conductor 180deg out of phase. 0.5V**2/R + 
0.5V**2/R = V**2/R. The R would be constant between the two cases.

-- 
73 de KK1L ex N1PBT...ron (rrossi@btv.ibm.com) <><
Ron Rossi H/P SRAM Engineering -- IBM Microelectronics



--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Re: coax as balanced line...CORRECTION, Ronald D Rossi <=