Hey guys -
I know that bulkhead entrance structures are the way to go for lightning
protection - I use them all of the time in our microwave sites and vhf/uhf
locations. Yes, be sure to bond the outside of the bulkhead to the external
ground system, and yes, be sure to bond the inside to the structure's power
utility ground.
But - do not use the ACEG (green wire) system in the house to make the power
ground connection.
Run a separate conductor from the bulkhead to the power utility ground rod
or UFER appearance outside of the shack or house.
Keep the external energy external. Also, GFI breakers may find this double
ACEG grounding confusing.
Anyone with other thoughts?
Eric, K6GV
edwoods@pacbell.com
----------
My electrical power service panel is on the other side of the house, but
I will be sure to bond the electrical safety ground electrode to this
Aluminum entry panel.
Stan, WA1ECF Cape Cod, MA FN41sr
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|