Barbara seems very nice....thought I would forward her e-mail for the
"official skinny" on them clamps
el jugo
---------------------
Forwarded message:
From: Karon.Harris@telex.com
To: K4OJ@aol.com
To: <towertalk@contesting.com>
Date: 97-08-26 08:53:44 EDT
The minimum mast size is 1 1/4" OD with a max size of 2 1/2" OD. The
manual is on its way. 73, Barbara, KA0GON
K4OJ@aol.com on 08/25/97 11:07:22 PM
To: Karon Harris/Lincoln/Telex
cc:
Subject: Re: 204BA help, again
Barbara,
Thanks for your assistance...one technical (?) question....what size mast
does the cast clamp that grabs onto the mast accept....in particular, what
is the minimum size it will work with....the literature I have shows a
maximum size, I need to know if it will work onto a 1.5" OD pipe.
Thanks again for your help,
Jim White, K4OJ
k4oj@aol.com
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|