Towertalk
[Top] [All Lists]

[TowerTalk] loosening rusted bolts/tower joints

To: <towertalk@contesting.com>
Subject: [TowerTalk] loosening rusted bolts/tower joints
From: dick@libelle.com (Dick Flanagan)
Date: Wed, 1 Oct 1997 18:48:21 -0800
At 8:31 PM -0800 10/1/97, Randy Farmer wrote:
>Don't know if anybody's mentioned it before, but the **absoulte best**
>thing I've ever seen for breaking loose badly rusted hardware of any type
>is a product called KROIL, made by Kano Laboratories in Nashville, TN. This
>stuff is absolutely magic.
> . . .
>That's the good news. The bad news is that it's not sold over the counter.
>You can get it only direct from the factory (whose address I don't have
>handy now -- all my stuff is still packed away from my recent move to NTX)
>in case lots.
> . . .
>A few years ago, three or four of us motorheads at work got together and
>bought a case of aerosol cans. The factory doesn't mind selling it to
>individuals; they just don't sell it retail.

See http://www.thomasregister.com/olc/kano/kanopnlu.htm

It looks like it sells for $5.50 per can or $16 per gallon.

73, Dick

--
Dick Flanagan W6OLD CFII Minden, Nevada (South of Reno)
http://www.qsl.net/w6old/



--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>